Choose your filament
Start with the material specified for your model and part. Use the guide for clips, locks and other moving parts.
Use a slicer profile for your filament, printer, nozzle and build plate. Follow your filament maker’s drying instructions. For Bambu Lab materials, see the Bambu Lab Filament Guide.
Before you print
- Check the model’s recommended print orientation and leave room in your slicer for any supports or brim.
- If a part is too wide for the bed, try turning it diagonally while keeping it flat. Only try tilting if the model instructions allow it. Tilting can add supports, change layer direction and affect the finish. Re-slice and check the full footprint and height before printing.
- Clean your build plate as directed by its manufacturer. Keep filament dry and store opened spools in a sealed container with desiccant.
- Check the first layer. Test a small part for fit before printing a whole module.
- Let the plate cool before removing the print. Remove supports and test-fit runners, hinges and locks before tightening the bolts.
Cleaning, storage and repairs
Keep away from heat
Store your modules away from heat sources and out of direct sunlight. Avoid leaving them in hot cars or beside heaters and machinery exhausts.
Wipe printed parts with a soft, slightly damp cloth and dry them afterwards. Avoid harsh solvents and dishwashers. Follow the care guidance for your filament, as heat resistance varies by material and print settings.
Help with your files
Download link or model file problem? Report an order issue.
